Patient Shielding

Tungsten Eye Shield

Provides adequate protection of the ocular structure for electrons or superficial shielding. Each eye shield is coated with a 2mm minimum thickness of dental acrylic on the bean entrance of the shield to reduce electron backscatter to eyelid. 2mm tungsten shield should be used for 6 MeV and the 3mm tungsten shield should be used for 9 MeV. These are not recommended for use above 9 MeV. Available in three sizes; small, medium, large. Sold as single unit or as a set.

Testicle Shield

Made of lead with painted surface and are designed to reduce scatter radiation to the testicles. Each unit is cast to provide a lead wall thickness of 1⁄2” and features an open sector to allow comfortable attachment to the patient. All surfaces are coated with polyurethane paint to reduce lead exposure.

The shield’s top and bottom sections are secured with either the two rubber straps, provided, or with nylon tape. When using the testicle shield stand, no straps are needed. A special dome and groove between the two halves of the shield, stop leakage and prevent them from sliding apart.

Available in three sizes; small, medium, large. Sold as single unit or as a set.

Silicon Testicle Shield for CT Imaging

Testicle Separator

Designed to move all or part of testicle and scrotum out of the direct beam while irradiating a portion of scrotum. Made of rugged clear acrylic. This ‘T’ type shaped device features a grooved adjustment blade that easily adjusts to any vertical or angled position, then locks in place with a turn of the knob.

Testicle Shield Stand

This adjustable stand offers increased patients comfort while raising or lowering the shield. A hand knob allows for easily vertical adjustment from 1” to 10”. Can be used for anterior and posterior treatments.

Lead Mobile Barriers

Radiation safety mobile lead shield with caster wheels. Single shield of lead supported with strong iron frame. Custom sizes available for fixed height or adjustable

Source Trolley

16cm dia and 37 cm height. Custom sizes available.

Gel Bolus - Tissue Equivalent Build-up Material

Superflab is exceptionally elastic, conforming to patient contours, while maintaining uniform thickness

• For enhanced dose build‐up to skin
• Conforms well to patient’s contour
• Maintains uniformity of thickness
• Will not dry out
• Reusable, can be washed with soap and water
• Approved for human contact
• Sizes available in square of 30x30cm; 0.3, 0.5, 1, 1.5, 2, 3 & 4 cm thickness

RT Custom Bolus

Ideal for hard‐to‐bolus areas such as: chest wall, nose, parotid, groin, ears, and any irregularly surfaced anatomical feature. The attenuation characteristics of this product are comparable to other polymer‐based products; however, its physical properties are superior. The RT Custom Bolus softens in hot water and becomes mouldable just like thermoplastic.

• Available in sheet or pellet form.
• Won’t dry out or change shape.
• Density: 1.1 g/cm3
• Sizes available : 7x22, 20x23, 30x30, 43x43, 30x45cms; thickness : 3.2, 4.8mm

Brass Mesh Bolus

This bolus can be used for post‐mastectomy chest walls using 4Mv and 6Mv photons. When placing Brass Mesh over breast and a gap is between breast, use a piece of back to back tape on the patient between the breasts to secure the brass mesh down.

Size: 18" x 18" (45x45 cm). Thickness: 1.5 mm

Super Stuff Bolus Material

It has a density of 1.02g/cm3. There are 50 ‐ 1 ounce packages of powder which are packaged in a plastic bag with a black water fill line indicated on the bag. After mixing, Super Stuff takes on the consistency of Jello®. Seal with plastic wrap and shape to fit the patient.

Straight & Curved Body Caliper

For central axis and off axis measurements. The reversing calliper orientation assists in determining separation such as laterals, oblique and off table measurements. Wide base ensures perpendicularity to table‐top. Straight scale with 55, 45 & 24 cm lengths.

Rectal Markers

Comprises of tungsten balls precisely placed inside reusable sleeve and adjustable Anas Marker. This allows to accurately determine the rectal distance from the radiation source.

Shadowform Markers

• Disposable
• Available in two lengths and are marked at 1 cm intervals
• No cross contamination
• Latex‐free
• Used for Simulation and CT Planning

Vaginal Dilator

Acylic vaginal dilators are available in 2, 21⁄2 and 3 cm diameter, Length 25 cm
Vaginal Depth Scale
1.6cm Diameter; 26 cm Length

Countour Wire

Lead Contour Wire,
3mm (0.125) Diameter.
Weight: 1 lb (0.5 kg)

Heat Gun

Used to correct minor mistakes or modifications while making thermoplastic mold. Can also be used to melt alloy with flow control option.

Barometer & Thermometer

Both digital and analogue models are available. All Models are supported with calibration certificate.